SPI-240-15-T1 no.6027 1/7 features gaas infrared led plus darlington phototransistor photo-interrupter for reflow soldering compact type : h4.95 5 l6.0 5 w5.5mm taping type absolute maximum ratings at ta=25 c, 65%rh parameter symbol rating unit input led forward current i f 50 ma reverse voltage v r 5v power dissipation p d 70 mw output collector-emitter voltage v ceo 20 v phototransistor emitter-collector voltage v eco 5v collector curren i c 20 ma power dissipation p c 70 mw operating temperature topr --20 to +80 c storage temperature tstg --30 to +85 c electro-optical characteristics at ta=25 c, 65%rh parameter symbol condition min. typ. max. unit input forward voltage v f i f =10ma 1.0 1.15 1.4 v reverse current i r v r = 5 v -- -- 1 0 m a output dark current i ceo i f =0ma, v ce =10v -- -- 1 m a coupled collector output current i c i f =4ma, v ce =2v * 1 0.5 3 -- ma collector emitter v ce (sat) i f =4ma, i c =250 m a -- -- 1.2 v saturation voltage rise time tr v cc =5v, r l =100 w -- 100 -- m s fall time tf i c =10ma -- 100 -- m s * 1 measurement circuit of collector current sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan SPI-240-15-T1 gaas infrared led ultraminiature photointerrupter supporting reflow soldering (darlington-transistor type) 72199 gi, ( mi ) if=4ma vce=2v a ic ordering number : en6027
SPI-240-15-T1 no.6027 2/7 typical characteristics these numerical value show the electrical and optical characteristics of this product, and not assure this contents. caution 60 50 40 30 20 10 0 -25 0 25 50 75 100 120 100 80 60 40 20 0 -25 0 25 50 75 100 500 100 50 10 5 1 0 0.5 1 1.5 2 0 2 4 6 8 10 12 14 16 18 20 048121620 ta=75 c 50 c 25 c 0 c --25 c v ce =2v ta=25 c 0510 40 60 80 100 120 140 0 2 4 6 8 10 12 14 16 18 20 --25 0 25 50 75 100 i f =4ma v ce =2v ta=25 c pc(max) i f =15ma 10ma 4ma 7ma 2ma forward current vs. ambient temperature collector current vs. collector-emitter voltage ambient temperature ta ( c) collector-emitter voltage v ce (v) forward current i f (ma) collector current i c ( a) forward current vs. forward voltage forward voltage v f (v) forward current i f (ma) power dissipation vs. ambient temperature relative collector current vs. ambient temperature ambient temperature ta ( c) ambient temperature ta ( c) power dissipation p (mw) relative collector current (%) collector vs. forward current forward current i f (ma) collector current i c (ma) (rating) (rating)
SPI-240-15-T1 no.6027 3/7 typical characteristics these numerical value show the electrical and optical characteristics of this product, and not assure this contents. caution 10 -5 5 10 -6 5 10 -7 5 10 -8 10 -9 5 --25 0 25 50 75 100 120 100 80 60 40 20 0 -- 2 -- 1 0 1 2 3 1000 500 100 50 10 5 1 10 50 100 500 1k 5k 10k 0.5 0.6 0.7 0.8 0.9 1.0 --25 0 25 50 75 100 i f =4ma i c =250 a v ce =10v i fp =10ma v cc =2v ta=25 c i f =4ma v ce =2v ta=25 c d t f t r 0 + 120 100 80 60 40 20 0 -- 2 -- 1 0 1 2 3 i f =4ma v ce =2v ta=25 c i fp v cc r l v out v out i fp r d d 0 + 10% 90% t r t f collector-emitter saturation voltage vs. ambient temperature relative collector current vs. shield distance (1) relative collector current vs. shield distance (2) ambient temperature ta ( c) shield distance d (mm) collector-emitter saturation voltage v ce (sat) (v) relative collector current (%) shield distance d (mm) relative collector current (%) response time vs. load resistance test circuit for response time load resistance r l ( ) response ( s ) collector dark current vs. ambient temperature ambient temperature ta ( c) collector dark current i ceo (a) -- shield shield detector center detector center --
SPI-240-15-T1 no.6027 4/7 pin no. 3 1 2 2.5 3-0.4 3.5 5.5 ph.tr led 2 4.5 2 0.25 1.5 1.5 4.95 4.1 2.7 2.8 3.2 1 1 optical c / l injection gate c0.5 2.5 0.25 0.25 + 0.1 -- 0.2 0.6, max 0.1 pin connection 1. ph. tr collector 2. common (cathode) 3. led anode 6 0.3 3 0.3 tolerance : 0.2 unit : mm
SPI-240-15-T1 no.6027 5/7 package dimensions and pin connection as stated in the sttached paper. (no.6027 4/7) soldering conditions (1) reflow soldering the temperature of the reflow furnace is to be set in accordance with the following temperature profile. soldering must be done only one time. temperature : on the topsurface of product reflow type : hot air (2) manusl soldering temperature : max. 290 c (soldering iron tip temperature) time : max. 3 sec clearance : min. 0.5mm from package (1) bending a lead should avoid. however, when bending is necessary, take care the next items. q bending a lead must be done before soldering. w bending a lead must be done in the states of fixing leads and no stress for the regin part. because it is possible that stress for the regin part cause troubles such as gold wire breaking and so on. e a lead must be bend under the stay. r do not bend the same position of leads more than twice. (2) the hole pitch of a circuit board must fit to the recommended mounting dimension. (3) take core the following when soldering. q do not heat a product under any stress (a twist and so on) to leads. w do not heat a product in the states of operating force to the regin part. (4) use the flux which contain no chlorine, have no corrosion and do not need washing. (5) be careful that flux or other chemicals do not attach to the luminous surface and passive surface. (6) precautions of the product after the open dry packing q the product after the open dry packing should be stored in the dry packing again. the product should be kept under the conditions below, if the product is not stored in the dry paking. temperature : 5 to 30 c humidity : max 70%rh term : max 7days w the product to be out the term without dry packing must be practiced baking. baking conditions : +60 5 c, 10 to 20hr (7) the reflow conditions must be confirmed that no problem by your reflow furnace. precautions max 220 c 180 c max 160 c max 60sec 0.5mm 0.5mm max 5sec max 40sec
SPI-240-15-T1 no.6027 6/7 ?.5 2 4 1.75 7.5 (9.3) (5.6) 16 0.3 (3.5) (0.4) (5.3) (6.1) ( ?.7 ) ?3 ?1 ?30 1 ?0 1 17 1 unit : mm 22 1 2 8 taping specifications (1) dimensions of tape (2) dimensions of reel
SPI-240-15-T1 no.6027 7/7 caution 1. no products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster / crime-prevention equipment or the like, and the failure of which may directly or indirectly cause injury, death or property loss. 2. anyone purchasing any products described or contained herein for an above-mentioned use shall: 1) accept full responsibility and indemnify and defend sanyo electric co.,ltd., its affiliates, subsidiaries and distributors or any of their officers and employees, jointly and severally, against any and all claims and litigation and all damages, costs and expenses associated with such use. 2) not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on sanyo electric co., ltd., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. 3. information (including circuit diagrams and circuit parameters) disclosed herein is for example only; it is not guaranteed for mass production, sanyo believes the information disclosed herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. precautionary instructions in handling gallium arsenic products special precautions must be taken in handling this product because it contains, gallium arsenic, which is designated as a toxic substance by law. be sure to adhere strictly to all applicable laws and regulations enacted for this substance, particularly when it comes to disposal. manufactured by ; tottori sanyo electric co., ltd. led division 5-318, tachikawa-cho, tottori city, 680-8634 japan tel: +81-857-21-2137 fax: +81-857-21-2161 ps
|
